Complete Roofing Solutions for Kettle Falls
We've been providing roofing services to Kettle Falls homeowners and businesses for 16 years. From repairs to full replacements. It's all we do, and we do it right.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →Roof Repair
We repair asphalt shingle, metal, flat membrane, and tile roofs. Our trucks carry common repair materials so most fixes happen same-visit. Shingle repairs, flashing replacement, pipe boot swaps, ridge cap fixes, valley re-flashing. All routine for our Kettle Falls crews.
Get a Free Quote →Storm Damage Repair
Storm damage is time-sensitive. Most insurance policies in Washington require claims within 12 months. We do a free inspection, document every damaged area with photos and measurements, and help you file the claim. If the adjuster approves it, we handle the repairs at the insurance-approved price.
Get a Free Quote →New Roof Installation
For Kettle Falls new builds, we recommend Tamko Heritage or Malarkey Vista AR for budget-conscious projects and Atlas Pinnacle Pristine with Scotchgard for algae-resistant performance. High-end builds get GAF Timberline HDZ or Owens Corning Duration STORM. Each carries different warranty tiers. We walk you through the comparison so you're choosing with real information, not marketing brochures.
Get a Free Quote →Metal Roofing
Standing seam metal with Kynar 500 PVDF fluoropolymer finish. The gold standard for color retention and chalk resistance. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel. UL 2218 Class 4 impact resistance (qualifies for insurance discounts in most Washington markets). UL 790 Class A fire rating. Wind uplift rated to 140+ mph per ASTM E1592 testing. Concealed Z-clips allow thermal expansion without stress on fasteners. That's what makes standing seam leak-proof.
Get a Free Quote →Shingle Roofing
GAF Timberline HDZ. The best-selling shingle in North America. With StrikeZone nailing area for consistent fastener placement. Class A fire rating per UL 790, Class 4 impact resistance per UL 2218 (when installed in the GAF Roof System), and Class H wind rating per ASTM D7158 (130 mph). We install Timberline in the full GAF system to qualify for Golden Pledge warranty: 25-year non-prorated workmanship plus 50-year materials with WindProven limited wind warranty (no max speed). That warranty is why we recommend GAF for most Kettle Falls homes.
Get a Free Quote →Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Kettle Falls. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →Commercial Roofing
We install Carlisle SynTec and Firestone TPO membrane systems in 60-mil and 80-mil thickness over minimum R-25 polyiso insulation (more in climate zones requiring it). Seams hot-air welded at 900°F+ and tested with a seam probe. Fully adhered systems for wind uplift zones per FM I-90 or I-120. Mechanically attached for re-roofs over existing insulation. NRCA member, trained per manufacturer specifications.
Get a Free Quote →Gutter Installation
Gutter replacement in Kettle Falls costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →Roof Inspection
Our 27-point residential roof inspection: (1) shingle condition and granule loss, (2) nail pops, (3) lifting tabs, (4) ridge cap integrity, (5) valley flashing, (6) step flashing at walls, (7) chimney flashing and counter-flashing, (8) drip edge condition, (9) pipe boot seals, (10) plumbing and HVAC vent integrity, (11) ridge vent function, (12) soffit ventilation, (13) gutter pitch and capacity, (14) downspout drainage, (15) fascia condition, (16) soffit condition, (17) ice dam evidence, (18) moss or algae growth, (19-27) attic: decking moisture, insulation displacement, rafter condition, bathroom exhaust routing, daylight penetration, ventilation balance, mold indicators, pest intrusion, previous repair evidence. Written report with annotated photos emailed same day.
Get a Free Quote →Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →